RO Replacement Membrane

Description

Reverse Osmosis Repayment Membranes

Our membranes are off outstanding quality resulting in low conductivity output water.

Product specification
Membrane type: Thin-film composite
Membrane material: PA (Polyamide)
Outstanding performance, high stability and reasonable price

Specifications
Max. operation pressure: 600 psi（4.2 MPa）
Max. feed water temperature: 45 ℃
Max. feed water SDI: 5
Max. free chlorine in feed water: ＜0.1mg/L
Range of feed water PH value of constant run: 3 – 10
Range of feed water PH value of chemical cleaning: 2 – 11

Please remember all gallons are quoted by the manufacturer in US gallons, and remember there are many factors that can affect the output of reverse osmosis water filters, input water pressure, TDS of Input Water, Bacterial Film build up on RO Membranes (not changing pre-filters often enough) and water temperature.

You will not obtain optimum output unless you can replicate the manufacturers test conditions. This is not for this specific brand but most types of RO membrane.

Sizes Available

50 gpd

75 gpd

100 gpd