Home » Shopping » Pond Plumbing
Please select a product from above.
For all major items associated with Pond Builds incl. solvent cement and Bottom drains Skimmers etc. please goto our >> Pond Construction Department
PIPE is available in 3 meter lengths and unfortunately can also carry a shipping surcharge.
This surcharge can often be waived, and is fully explained within the relevent department.
Important information regarding plumbing (pipe fitting) operations.
As the various component parts (Fittings, Valves & Pipe etc.) have to be fitted together, it is neccessary to ensure that dimensionally all the component parts fit together.
There are two systems generally available for pond plumbing and are referred to as Waste pipe size and Pressure pipe size. Please see following table.
ACTUAL PIPE O.D.(Outside Dimension) is shown in mm in RED below
Waste pipe sizes: 1.11/2" ( 43mm) :: 2" ( 56mm) :: 3" ( 83mm) :: 4" ( 110mm)
Pressure pipe sizes: 1/2" ( 21.3mm) :: 3/4" ( 26.7mm) :: 1" ( 33.6mm) :: 1.1/2" ( 48.3mm)
2" ( 60.3mm) :: 3" ( 88.9mm) :: 4" ( 114.3mm)
Metric system another size becoming increasingly common is metric sizing, and in the E.U.it is often used as a standard, the most common size being 50mm (50mm O.D.)
New fitting added to our catelogue is a reducing sleeve to convert 50mm metric size to our nearest imperial size 1.1/2" pressure pipe ( 48.3mm O.D.)
CONVERTING FROM PRESSURE TO WASTEThis is possible with the addition of Reducer Sleeves. These sleeves are often referred to as Slide valve sleeves.
Any stated specifications are for information only and do not represent anything other than our own interpretations, and may or may not be the manufacturers specifications.
Basket total: £0.00