Home » Shopping » Water Pumps » Hailea Immersible / Inline



Aquaforte DM Vario PumpAquamax Eco OptimaxAquamax Eco PremiumAquamax Eco Titanium 50,000Blue Eco Pumps
Eco Max DM PumpsEco S SeriesEco-S Pump SparesFlowfriend PumpHailea Immersible / Inline
Hailea Pump SparesMega Flow PumpPond EcoWatt Pumps


  Hailea Immersible / Inline


With a high quality aluminium ceramic shaft and bearings these pumps are designed for continuous use. Used correctly pumping non abrasive liquids they have an extremely low wear rate. The HX-88 series are all fitted with a pre-filter see below

They will of course handle soft non abrasive solids 2-3mm low percentage in suspension.

HX-88 SERIES PREFILTER




Pumps fitted with integral filter strainer are:-


3100 ltrs / hr.......... HX-8830
4100 ltrs / hr.......... HX-8840
6500 ltrs / hr.......... HX-8860
9000 ltrs / hr.......... HX-8890





HAILEA DATA SHEET

1000 ltrs. / hr HX-6520 Suction = 14.5mm Delivery = 14.5mm
Max.head = 1.6 mtr Power = 35 Watts Power cord = 1.75 mtrs
Dimensions:: L=132mm x W=98mm x H=150mm

1750 ltrs. / hr HX-6530 Suction = 17.5mm Delivery = 17.5mm
Max.head = 2.3 mtr Power = 50 Watts Power cord = 1.75 mtrs
Dimensions:: L=154mm x W=120mm x H=170mm

2880 ltrs. / hr HX-6540 Suction = 24.0mm Delivery = 20.0mm
Max.head = 3.1 mtr Power = 100 Watts Power cord = 2.250 mtrs
Dimensions:: L=185mm x W=150mm x H=180mm

2880 ltrs. / hr HX-6540 Suction = 24.0mm Delivery = 20.0mm
Max.head = 3.1 mtr Power = 100 Watts Power cord = 10 mtrs Listed separately if available
Dimensions:: L=185mm x W=150mm x H=180mm

3000 ltrs. / hr HX-6830 Suction = 26.0mm Delivery = 23.5mm
Max.head = 3.2 mtr Power = 100 Watts Power cord = 1.75 mtrs
Dimensions:: L=207mm x W=98mm x H=162mm

3100 ltrs. / hr HX-8830 Suction = 26.0mm Delivery = 22.5mm
Max.head = 2.4 mtr Power = 60 Watts Power cord = 10 mtrs
Dimensions:: L=226mm x W=115mm x H=175mm

4100 ltrs. / hr HX-8840 Suction = 32.0mm Delivery = 26.0mm
Max.head = 2.8 mtr Power = 100 Watts Power cord = 10 mtrs
Dimensions:: L=232mm x W=130mm x H=200mm

5550 ltrs. / hr HX-6550 Suction = 27.0mm Delivery = 24.5mm
Max.head = 4.0 mtr Power = 200 Watts Power cord = 3.25 mtrs
Dimensions:: L=202mm x W=156mm x H=225mm

5550 ltrs. / hr HX-6550 Suction = 27.0mm Delivery = 24.5mm
Max.head = 4.0 mtr Power = 200 Watts Power cord = 10 mtrs Listed separately if available
Dimensions:: L=202mm x W=156mm x H=225mm

6500 ltrs. / hr HX-8860 Suction = 26.0mm Delivery = 26.0mm
Max.head = 4.2 mtr Power = 150 Watts Power cord = 10 mtrs
Dimensions:: L=285mm x W=152mm x H=168mm

7000 ltrs. / hr HX-6850 Suction = 38.0mm Delivery = 32.0mm
Max.head = 5.0 mtr Power = 200 Watts Power cord = 3.25 mtrs
Dimensions:: L=269mm x W=126mm x H=206mm

9000 ltrs. / hr HX-8890 Suction = 32.0mm Delivery = 24.5mm
Max.head = 5.8 mtr Power = 240 Watts Power cord = 10 mtrs
Dimensions:: L=305mm x W=162mm x H=183mm

The above information is copied from the manufacturers data sheets

DISCLAIMER

TECHNICAL DATA IS FOR INFORMATION ONLY, AND WE TAKE NO RESPOSIBILITY FOR ANY INACCURATE SPECIFICATIONS.

For more immersible pumps please see our : Aquarium water pumps

Please Remember

All our pices include V.A.T. :

Don`t forget to join our New Members Club and receive an extra 5% discount.

 



3100 ltrs/hr Immersible Pond Pump HX8830

3100 Ltrs / Hr (675gls.) Power 60 watts. High jet (2.4 mtrs.) Dual purpose water pump (In or out of the water)

With a high quality aluminium ceramic shaft and bearings they are designed for continuous use. Used correctly pumping non abrasive liquids they have an extremely low wear rate.

Supplied with 10 meters of power cord, and an internally fitted pre filter.

Equally at home in salt or fresh water, and can also be used submersed or as an inline pump out of the water.


Specifications : L. 226mm x W. 115mm x H. 175mm ::: suction 26 mm. ::: Delivery 23 mm.


Temporally out of stock


Our price : £42.50 | Members Price: £40.38
6500 ltrs/hr Immersible Pond Pump HX8860

6500 Ltrs / Hr (1400gls.) Power 150 watts. High jet (4.2 mtrs.) Dual purpose water pump (In or out of the water)

With a high quality aluminium ceramic shaft and bearings they are designed for continuous use. Used correctly pumping non abrasive liquids they have an extremely low wear rate.

Supplied with 10 meters of power cord, and an internally fitted pre filter.

Equally at home in salt or fresh water, and can also be used submersed or as an inline pump out of the water.


out of stock

Specifications : L. 250mm x W. 150mm x H. 175mm : suction 1.00 ins. : Delivery 1.00 ins.


Temporally out of stock


Our price : £55.00 | Members Price: £52.25
8000 ltrs/hr Immersible Pond Pump with Fountain Kit HX8890F

8000 Ltrs / Hr (1982gls.) Power 240 watts. High jet (5.8 mtrs.) Dual purpose water pump (In or out of the water) Also supplied with this one is a comprehensive fountain kit .

With a high quality aluminium ceramic shaft and bearings they are designed for continuous use. Used correctly pumping non abrasive liquids they have an extremely low wear rate.

Supplied with 10 meters of power cord, and an internally fitted pre filter.

Equally at home in salt or fresh water, and can also be used submersed or as an inline pump out of the water.


Specifications : L. 305mm x W. 162mm x H. 183mm : suction 1.25 ins. : Delivery 1.00 ins.




Our price : £67.50 | Members Price: £64.12
Flow Curves for 3100 ltr/hr - 9000 ltr/hr HX-88 Series Pumps Above

Performance curves for the above HX-8830 : HX- 8840 : HX-8860 : HX-8890.

Example The 6000 ltr HX-8860 is required to pump a total head of 2.0 mtrs.To find the flow rate at this head.

From the 2.0 (Mtr.) mark on the Head (M) axis move accross to the relative curve in this case HX-8860 (Green curve) and then move down to meet the Flow (L/H) axis and note the reading at this point. It can be seen that a Maximum of aproximately 5000 L/H flow will be available for a total head loss of 2.0 Mtrs.

Please note (Total Head loss = Head height + Friction loss in system ) See Total head loss


£ POA
7000 ltrs/hr Immersible Pond Pump (HX 6850)

7000 Ltrs / Hr (1540gls.) Power 200 watts. High jet (5.0 mtrs.) Dual purpose water pump (In or out of the water)

With a high quality aluminium ceramic shaft and bearings they are designed for continuous use. Used correctly pumping non abrasive liquids they have an extremely low wear rate.

Supplied with 3.25 meters of power cord.

Equally at home in salt or fresh water, and can also be used submersed or as an inline pump out of the water.


Specifications : L. 269mm x W. 126mm x H. 206mm : suction 38mm. : Delivery 32mm.


Temporally out of stock


Our price : £57.50 | Members Price: £54.62
Flow Curves for 3000 ltr/hr and 7000 ltr/hr Water Pumps Above

Performance curves for the above HX-6830 and HX- 6850.

Example The 7000 ltr HX-6850 is required to pump a total head of 2.0 mtrs.To find the flow rate at this head.

From the 2.0 (Mtr.) mark on the Head (M) axis move accross to the relative curve in this case HX-6850 (Blue curve) and then move down to meet the Flow (L/H) axis and note the reading at this point. It can be seen that a Maximum of aproximately 5000 L/H flow will be available for a total head loss of 2.0 Mtrs.

Please note (Total Head loss = Head height + Friction loss in system ) See Total head loss


£ POA
Power Head immersible 2880 ltrs/hr Water Pump HX-6540

A Dual function immersible pump Can also be used as an in line pump.

Is equally at home in either salt or fresh water.and is supplied with suction and discharge hose-tails

Flow rate: 2880 ltrs/hr.
Head height: 3.1 mtrs.
Power: 100 watts.
Suction: 24 mm
Delivery outlet: 20 mm.
Dimensions: L:185mm W:150mm H:180mm

Could also be used in larger Hydroponic Systems.


Temporally out of stock


Our price : £45.50 | Members Price: £43.23
Power Head immersible 5550 ltrs/hr Water Pump HX-6550

A Dual function immersible pump Can also be used as an in line pump.

Is equally at home in either salt or fresh water.and is supplied with suction and discharge hose-tails

Flow rate: 5550 ltrs/hr.
Head height: 4 mtrs.
Power: 200 watts.
Suction: 27 mm
Delivery outlet: 24.5 mm.
Dimensions: L:202mm W:156mm H:225mm

Supplied with factory fitted 10 Mtr power cord.
Could also be used in larger Hydroponic Systems.




Our price : £57.50 | Members Price: £54.62
Flow Curves for 2880 and 5550 ltr/hr Water Pumps Above

Performance curves for the above HX-6540 and HX- 6550.

Example The 2880 ltr HX-6540 is required to pump a total head of 2.0 mtrs.To find the flow rate at this head.

From the 2.0 (Mtr.) mark on the Head (M) axis move accross to the relative curve in this case HX-6540 (Black curve) and then move down to meet the Flow (L/H) axis and note the reading at this point. It can be seen that a Maximum of aproximately 1500 L/H flow will be available for a total head loss of 2.0 Mtrs.

Please note (Total Head loss = Head height + Friction loss in system ) See Total head loss


£ POA



£ POA



Basket total: £0.00


Shop Departments


Koi

Varieties